-
Summary of basic polishing steps of concrete floor
Sep 30,2020
Remove existing coatings (for thick coatings, use a 16- or 20-grit diamond abrasive or more aggressive tool specifically for coating removal, such as a T-RexTM). Seal cracks and joints with an epoxy or other semi-rigid filler. Grind with a 30- or 40-grit metal-bonded diamond. Grind with an 80-grit metal-bonded diamond. Grind with a 150-grit metal-bonded diamond (or finer, if desired). Apply a chem...
Read More
-
What's the differences between wet polishing pad and dry polishing pad
Aug 07,2020
Wet polishing pad and dry polishing pad are same use in stone polishing but differences on the usage. One is used with water and the other can be used with or without water. In polishing process, the heat is considerably high and it requests good heat resistant quality from the pad, so the formula and bond of the dry polishing pad should be different from that for wet polishing pad. No matter for ...
Read More
IPv6 network supported 
+86-595-22582118
info@jinshanstone.com
